Skip to content
Yash BlowersYash Blowers

SOLSolution

50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)

Rotary Vane Vacuum Pump for Printing & Packaging in Middle East

Rotary Vane Vacuum Pump sized for sheet-feeder vacuum hold-down and blow air — 80–300 m³/hr at 80–290 mbar vacuum and pressure — and built for the Middle East grid, climate and shipping route.

For a printing and packaging plant in Middle East, the rotary vane / liquid-ring vacuum pump is the component the process leans on — and Yash builds it to the 80–290 mbar vacuum and pressure band the job needs, not to a generic datasheet. Printing & Packaging means sheet-feeder vacuum hold-down and blow air — plan for 80–300 m³/hr and 80–290 mbar vacuum and pressure, and pick the smallest model that covers both.

Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. The supply is 50 Hz at 380–415 V (3-phase), and shipment is CIF Jebel Ali (or FOB Nhava Sheva). The shortlist below (YELVD-300, YELV-300, YELV-500) is a starting point — real load figures turn it into a firm selection and a quote in 24 hours.

MDLRecommended models

Rotary Vane Vacuum Pump — the fit for printing and packaging

Vacuum Pump

Dedicated vacuum for suction-only duty — vacuum hold-down beds, screen exposure frames and delivery stacking where you do not need the blow side.

Recommended Vacuum Pump models for this duty
ModelPowerFlow (m³/hr)Flow (L/min)VacuumPressureNoise (dB)Weight (kg)
YELVD-3001.0 HP18300600 mm/hg10 psi6020
YELV-3001.0 HP18300600 mm/hg10 psi6043
YELV-5002.0 HP30500600 mm/hg10 psi6575

One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Indicative only — final selection depends on your exact duty point, altitude and air temperature.

EXPBuilding for Middle East

Frequency
50 Hz
Three-phase voltage
380–415 V (3-phase)
Single-phase
220–240 V
Incoterms
CIF Jebel Ali (or FOB Nhava Sheva)
Ports
Jebel Ali · Dammam · Jeddah · Hamad · Sohar
HS code
8414 — air/gas blowers, fans & compressors

Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.

Sewage & STP aeration

Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.

Desalination & water treatment support

Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.

Aquaculture

Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.

Construction & cement

Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.

FAQRotary Vane Vacuum Pump for Printing & Packaging — FAQs

What about spares and lead time for a Middle East order?

Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Middle East that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.

Will the Rotary Vane Vacuum Pump run on Middle East power?

Yes. Units for Middle East are wound for 50 Hz at 380–415 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.

RFQ / Request for Quotation

Rotary Vane Vacuum Pump for Printing & Packaging in Middle East?

Send your duty point (80–300 m³/hr at 80–290 mbar vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).

WhatsApp