SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Centrifugal Blower for Water Treatment Plants in United States
Centrifugal Blower sized for iron & manganese aeration and rapid-filter air scour — 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour — and built for the United States grid, climate and shipping route.
The centrifugal blower is the natural choice for water treatment, and for United States the selection turns on 60 Hz power, destination Incoterms and the site environment. The water treatment duty here is iron & manganese aeration and rapid-filter air scour, typically 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour, and the centrifugal blower is sized to sit inside that window with margin.
The United States build is specified for 60 Hz / 208 / 230 / 460 V (3-phase) and ships FOB Nhava Sheva or CIF US ports via your US port. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. These centrifugal blowers — YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-150-10 — are export-packed, ISO 9001:2015 built, and dispatched with spares support that keeps a United States site running.
MDLRecommended models
Centrifugal Blower — the fit for water treatment
The air-scour machine — high flow at low pressure for the short backwash burst that fluidises a rapid sand or multimedia bed; also fits degasser duty.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
| YBCB-TBM-150-10 | 10 HP | 3600-4500 | 2119-2648 | 4000 | 5300 | 90/95 | 82 |
Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQCentrifugal Blower for Water Treatment Plants — FAQs
Is the Centrifugal Blower rated for continuous water treatment duty?
Yes — the recommended YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-150-10 are dynamically balanced and built for the 24/7 load that water treatment runs. The duty here is iron & manganese aeration and rapid-filter air scour at 200–3,300 m³/hr / 100–350 mbar aeration / low-pressure air scour; the machine is selected to hold that point continuously, not just touch it on a test bench.
How is a Centrifugal Blower sized for water treatment?
Sizing turns on two numbers — flow and airflow. Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. On this duty most selections sit around 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour. Fix the duty point, add a design margin, and pick the smallest model that covers both; YBCB-CX-125A and YBCB-CX-150A are the usual starting points.
RFQ / Request for Quotation
Centrifugal Blower for Water Treatment Plants in United States?
Send your duty point (200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.