SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
Centrifugal Blower for Textile in Africa
Centrifugal Blower sized for pneumafil suction, fibre transport and humidification air — 1,200–6,000 m³/hr at moderate, high-flow — and built for the Africa grid, climate and shipping route.
Yash exports the centrifugal blower into Africa for textile spinning and weaving the same way it builds for India — cast, machined and dynamically balanced in-house under an ISO 9001:2015 system — with the 50 Hz and Incoterm details handled for the destination. This is a pneumafil suction, fibre transport and humidification air duty: The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping.
Into Africa, orders route CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva) to Mombasa, on 50 Hz / 380–415 V (3-phase) builds. Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. Below are the centrifugal blowers that fit — YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-200-15 — with the specs, airflow and flow figures you need to choose. Send your duty point to confirm.
MDLRecommended models
Centrifugal Blower — the fit for textile spinning and weaving
The core high-flow machine — pneumafil and travelling-cleaner suction, blow-room transport air and humidification supply at thousands of m³/hr.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
| YBCB-TBM-200-15 | 15 HP | 3900-5100 | 2295-3001 | 5000 | 6500 | 95/110 | 117 |
The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Africa
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
- Ports
- Mombasa · Dar es Salaam · Durban · Lagos · Tema
- HS code
- 8414 — air/gas blowers, fans & compressors
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites.
Aquaculture
Diffused-air aeration for intensive tilapia, catfish and shrimp systems — holds dissolved oxygen in ponds, tanks and raceways across a fast-growing sector.
Mining & cement dust collection
Pressure and vacuum for pulse-jet baghouses and cartridge filters at crushers, transfer points, screens and bagging lines.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants as cities grow and effluent rules tighten — 24/7 rated machines.
Agriculture & food processing
Grain aeration, drying, and pneumatic conveying of flour, feed and granules in processing and packing lines.
FAQCentrifugal Blower for Textile — FAQs
What about spares and lead time for a Africa order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Africa that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
Will the Centrifugal Blower run on Africa power?
Yes. Units for Africa are wound for 50 Hz at 380–415 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
RFQ / Request for Quotation
Centrifugal Blower for Textile in Africa?
Send your duty point (1,200–6,000 m³/hr at moderate, high-flow), site voltage and destination port — an engineer sizes the model and quotes CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).